≡ Menu

Rep Fitness Victory FT-5000 Functional Trainer Review

Full Comprehensive Review of the Rep Fitness Victory FT-5000 Functional Trainer

This is a comprehensive review of the Victory FT-5000, Rep Fitness’ take on one of (if not  the most) versatile pieces of gym equipment available – the functional trainer.

For those of you who knew this review was coming and have been waiting patiently for me to complete it, I apologize for the longer than usual wait. I really wanted to be thorough with this review and that meant getting a lot of time on the FT-5000 before publishing anything. I also wanted a good amount of feedback from others who were using it in my gym. That too required slowing down the review process a little. A functional trainer is a major investment and I just wanted to detailed as possible with the content of this review.


FT-5000 Functional Trainer Review – Introduction

Functional trainers offer up an ridiculous amount of variety in terms of what movements are possible. There are far too many to list, but for those of you with a typical rack, bar, weights, and bench set up, the movements that are probably the most appealing include things such as weighted ab crunches, cable chest crossovers, reverse delt flyes, tricep pressdowns and kick-backs, cable curls, leg curls, single-arm rows, lateral and front shoulder raises, and the whole collection of cable-based, rotator cuff rehab/prehab exercise;  all great exercises that are difficult (and even sometimes impossible) to replicate with a barbell.

The Rep Fitness 'Victory' FT-5000 Functional Trainer

The FT-5000 – A beautiful and versatile machine if there even was one.

Technically, a functional trainer could provide one a full-body workout. I mean there really is no shortage of exercise options with the FT-5000 – core, chest, shoulders, arms, back, legs and more can be hit many different ways with multiple attachments. Still, I’m not going to try and make an argument for centering your training around a functional trainer.  That may be suitable or even appropriate for a small sect of the population, but I don’t think you guys are all that interested in ditching the power rack and barbell (Lord knows I’d never do that).

No, rather I believe that a functional trainer should compliment existing gyms, as it provides access to so many great movements that could not otherwise be performed in the standard garage or home gym – at least not without having access to a whole plethora of other gear. I’m talking like a large selection of resistance bands, a full dumbbell set, multiple kettlebells, and probably even some other kind of cable machine. I’m not kidding you.. the total amount of exercises possible; the level of versatility that a functional trainer offers; is just insane.

In any case, in this review I’m not so much going to try to convince you of why you’d benefit from owning a functional trainer, I’m going to tell you about the Rep FT-5000 specifically so those of you who are in the market for a functional trainer know whether or not the FT-5000 is a good choice for you. I’ll be covering features, specifications, functionality, quality, prices and comparisons, and much more.  I’ll let you know what I like (and even dislike) about this machine, how happy I am with it, and things you should know before purchasing your own.

I hope you find this review helpful. If you have any questions about this review, want to sing your praises of the FT-5000 (or voice your concerns), or just leave a comment for the sake of leaving a comment, please feel free to do so in the section following the article.


FT-5000 Review – Table of Contents


Rep ‘Victory’ FT-5000 Functional Trainer Specifications

  • Frame Details
    • laser cut, robot welded, 2″ x 4″, 11-gauge steel frame
      • minimal amount of hardware needed for assembly
    • bolt heads are all capped for safety and aesthetics
    • frame is two-layer electrostatic powder coated; very attractive and resilient
    • lifetime frame warranty
  • Dimensions:
    • overall: 85″ high x 72″ wide x 45″ deep
      • depth (for wall placement): 36″
      • wall length needed for corner placement: 65″ per side
    • 561-lb machine with (2) 220-lb weight stacks (1001-lbs total)
  • Cable Specifics
    • weight stacks are 220-lbs with a 2:1 ratio (110 effective load per stack)
    • weight stacks adjust in 2.5 kg / 5.5 lb increments
    • minimum effective load is 11-lbs per stack
    • maximum cable travel distance is 81″
    • 16 pulley settings per side; laser numbered
    • weight selector pin is magnetic and secure
    • two grippy, urethane D-handles (stirrups) are included with the FT-5000
  • Other features
    • pulleys are reinforced fiberglass; very smooth with no catching or dragging
    • 3 sets of rubber-coated, pull-up/chin-up handles at different heights
    • Two horizontal crossmembers offer six storage pins for your attachments
    • a steel placard demonstrates 12 of the many possible exercises

Rep FT-5000 Functional Trainer – Shipping

When you order the FT-5000, it will ship freight. What that costs you obviously depends on your location. Fortunately, Rep is located fairly central; in Denver, CO; so shipping is never really bad when dealing with them (no cross-country freight rates.)

It only took four days to receive my FT-5000 (here in Texas). On day one I placed the order, on day three I was contacted by the freight company to schedule my delivery,  and the very next day it was delivered. I have zero complaints regarding the shipping.

Your functional trainer will arrive in a large, wooden crate. This crate; rather than the usual corrugated boxes stacked on a pallet; does wonders in terms of making sure no damage is done to the product en route (though you will have to figure out what to do with the crate!)

 

View this post on Instagram

 

A post shared by Garage Gyms (@garagegymscom) on

Rep FT-5000 Functional Trainer – Assembly

As it turns out, the assembly process is not bad at all. I did it in only a few hours without any help! Rep claims that assembly should take about two hours with two people, and based on my experience of assembling it solo I can definitely see how getting it up and running in that short amount of time would be possible; that is, assuming you have all the proper tools prior to starting assembly. Here’s what you’ll need:

  • a metric hex key set (Allen wrenches)
  • a metric wrench set
  • a metric socket set

I highly recommend you figure out where you’re putting this monstrosity before you finalize assembly. It does not move easily once completely assembled.  Remember, it weighs in at 1000-lbs!


Rep FT-5000 Functional Trainer – Build Quality

The Rep Fitness FT-5000 is a commercial-quality piece of gym equipment; not a light-duty, low-quality home product.  You could just as easily stick this machine in a commercial gym as you could in your private gym, and truth be told, commercial-quality equipment is exactly the sort of equipment you should always try to purchase for your gym if your goal is to have access to safe and reliable equipment that won’t wear out and need to be replaced.

So what makes the FT-5000 a commercial piece rather than a home unit?

The FT-5000 is made from high-strength, 11-gauge steel tubing. Aside from a couple cross-members that are attached via large bolts, the frame is almost entirely welded. This minimal amount of assembly hardware makes for a very strong & durable piece of equipment. Were it not for the fact that the thing still needs to be shipped, I’m certain that the frame of the FT-5000 would be entirely welded and require no frame assembly at all! In any case it doesn’t matter because the frame is as solid as a rock.

Rep Fitness FT-5000 has two horizontal crossmembers that double as attachment storage

The two massive, 11-gauge crossmembers that connect both sides of the FT-5000 Functional Trainer each have multiple hooks (3 per crossmember) for storing your various cable attachments.

In addition to thicker steel frames and welds versus hardware, commercial-grade machines tend to have larger, more stable footprints, higher-quality hardware (where hardware is still being used), higher-load cables, more adjustment settings, larger weight stacks and higher maximum capacities, and so forth. Yes, you can buy a functional trainer for less than $2000 but it’s going to leave a lot to be desired. Even Rep’s own, less costly FT-3000 didn’t appeal to me when compared to the FT-5000 (which I’ll get into later.)

In any case, the FT-5000 is an excellent piece of high-quality equipment. It’s strong enough for the global gym, meaning it should literally last forever in your garage. Nothing about this product feels cheap to me –  I’ve never been concerned about it breaking or failing, and I’ve never been concerned about my safety while using it.


Rep FT-5000 Functional Trainer – Stability

The FT-5000 is over a thousand pounds fully assembled. This thing is extremely heavy and it is extremely stable. It does not move around or shift at all during use no matter how much total weight you are pulling or what angle you are pulling the weight from. Rest assured that there are literally no stability issues with this product.

Speaking of heavy, let me just remind you to think really hard about where you intend to put yours before you finalize assembly. The FT-5000 is not a very easy product to move around after the fact.  What I suggest is getting the frame itself assembled and then move it to your preferred location. Only when you are happy with where it is going do you begin to drop the weight plates in and complete the assembly.  I’m telling you, the difference in moving a 560-lb frame and a 1000-lb completed unit is far from subtle.


Rep FT-5000 Functional Trainer – Dimensions

Functional Trainers are fairly large pieces of gym equipment; requiring quite the floor space commitment (about as much space is needed as what’s required for a power rack and your 7′ barbell.)

 

View this post on Instagram

 

A post shared by Rep Fitness (@repfitnessequipment) on

Fitting what basically amounts to two power racks into a single garage gym may be a bit of a challenge for those with smaller garages or those who don’t have an entire bay to commit to their gym.  That said, consider how many garage gyms have; in addition to a power rack; a GHD, reverse hyper, or a lat tower. These too are very large units, and people make them work in their space all the time. I actually have a smaller-than-average garage, yet I have a Monster Power Rack, a full-sized lat tower, and the FT-5000 lined up.

Additionally, most functional trainers; including the Rep FT-5000; have the added benefit of being shaped like a trapezoid. That is, they are angled outward from the rear; meaning they can be backed into a corner. Setting a functional trainer up in the corner doesn’t make your machine any smaller, but it does make better use of the space. Not many pieces work well in a corner because most things require a certain amount of working space around them. A functional trainer doesn’t require you to be anywhere else but in front of it. I started with my FT-5000 backed against a wall, but I ultimately moved it to the corner. It made a difference.

In terms of height, the FT-5000 is not overly tall at 85″ high (just a hair over 7′.)  It will easily fit in homes and garages with 8′ ceilings while also giving plenty of head room for chins and pull-ups. It should even fit under the open garage door; giving you more placement freedom than you get with most power racks (though you’ll clearly want to confirm this in your gym).

The FT-5000 should even fit in the vast majority of basement gyms with zero issue.


Rep FT-5000 Functional Trainer – Cable & Pulleys

The FT-5000 has very smooth, fiberglass reinforced pulleys and 3/16″ high-strength, nylon-coated steel cables. The entire system is very fluid; there is no catching or dragging on the line regardless of where you set your handles on the column.

Cable and pulley system of the Rep Fitness FT-5000

There are 16 vertical settings on the columns, with the handles able to be set mere inches from the ground, and about 10″ from the very top of the unit. The pulley component of the handles (the half moon-shaped things that the cables poke out of) pivots about 180º, which allows you to position yourself nearly anywhere around the front half of the machine.

The handle carriages themselves are on wheels; which is apparently a new addition to the V2. I don’t know how the original version performed, but these carriages are very simple to move up and down the column with just one hand.

The carriages of the Rep FT-5000 glide smoothly on their columns thanks to internal wheels

The travel length of each cable is over 80″ – or over 6½” feet. If that is not enough distance for you, I’d be curious to know what exercise you are trying to perform.

I don’t have anything negative to report regarding the pulleys or cables. Again, there is no dragging or catching on either cable, and one side never feels any different from the other side when using both handles  (flyes, pulldowns, etc.) The system is smooth and perfectly balanced.


 

Rep FT-5000 Functional Trainer – Attachments

The FT-5000 comes with two urethane, stirrup-style handles. These are pretty solid handles from what I can tell.  The handles rotate, they’re surprisingly grippy, and they weigh close to nothing. I like these a lot better than the cheap, chrome-finished stirrups that you commonly come across in the global gyms (you know the ones I’m talking about.)

The FT-5000 comes with a pair of urethane strap handles

You don’t really need to replace these included handles; they work well and feel great. Now I wanted to sample some of Rep’s Pro-line Attachments so I did indeed replace mine with a pair of Pro D-Handles, and yes I like them more because of how they pivot and rotate, but I don’t think it’s necessary to upgrade.

Rep Fitness Pro D-Handle vs the included urethane stirrups

Of course being a functional trainer and having access to so many different exercises, you’ll really need to pick up a few more attachments. I recommend at the very least: a Spud Strap (instead of the classic rope), a curl bar, and a V-shaped tricep bar (preferably rotating). You may also want to ankle cuff for hamstring curls, and a lat or row attachment of some sort.


Rep FT-5000 Functional Trainer – Weight Stacks

Each weight stack of the FT-5000 has 220-lbs worth of weight. Each individual plate weighs in at 11-lbs; or 5 kilograms.

Unlike simple cable machines (like the lat tower), functional trainers operate at a 2:1 weight ratio. This means that the total effective load of each 220-lb stack is 110-lbs, and the weight can be adjusted in 5.5-lb (2.5 kg) increments.

Rep Fitness FT-5000 220-lb weight stack with magnetic selector pin

Rep was kind enough to label each plate with the effective load, not the actual weight of each plate.

It should be pointed out that the first plate of each stack on the FT-5000 is not 5.5-lb like all of the others, it’s actually 11-lbs; or the equivalent of two plates. I am assuming that this is a result of there being a pulley and some other small components affixed to that first plate. No matter why it weighs 11-lbs, it’s important to know that it does.

To put all that another way, the minimum load of each cable is 11-lbs, not 5.5 lbs.

Included for each weight stack are two small, round weights that fit around the base of your guide rods. Each of these small weights is 2.75-lbs; or 5.5-lbs for the pair (which is 2.75-lbs effective weight, or exactly half of what a full-sized plate weighs).  These basically allow you to make smaller jumps in weight when necessary.

The FT-5000 comes with 4 (2-pair) of 2.75-lb weights for making smaller jumps in weight

These small, round weights allow you to increase the weight by smaller increments.

It’s also worth pointing out that the included pins for the stack are magnetic, which helps to keep the pin in place in-between reps.  It’s not a very strong magnet, but it’s strong enough to do its job. I’ve never had the pin slide or fall out.


Rep FT-5000 Functional Trainer – Pricing

The Rep Fitness FT-5000 is a little over $2000 delivered.  This is a commercial-quality unit with two of the heaviest weight stacks available;  heavier than the $4000 Precor FTS Glide, heavier than the $4000 Free Motion EXT, and way heavier than the $3000 Life Fitness G7 Gym (and these are all major commercial players.) The Rep has the heaviest stacks at the most competitive price.

Commercial Functional Trainer Price Comparisons

Below are a handful of the alternatives to the Rep FT-5000; including the three commercial functional trainers I just mentioned. Body Solid actually offers the most competitive price to the Rep FT-5000, but it is still more expensive than the Rep, and even with a 50-lb upgrade to the weight stacks, it’s still 10-lbs shy of the Rep. Still, not a bad alternative.

Stack Weight Ratio Height Price
 Rep Fitness FT-5000 220-lbs 2:1 85″ $1899
 Life Fitness G7 Gym 160-lbs 2:1 83″ $2999
 Precor FTS Glide 200-lbs 2:1 85″ $3999
 Free Motion EXT Dual 210-lbs 3:1 84″ $3995
 Inspire Fitness FTX 165-lbs 2:1 85″ $1799
 BodyCraft HFT 150-lbs 2:1 82″ $2399
 Strencor FT 210-lbs 2:1 88″ $3598
 Body Solid GDCC200 FT 210-lbs 2:1 83″ $2170

 

Body Solid GDCC200 Functional Trainer

If you are seriously in the market for a functional trainer then I hope you took a few minutes to look at these other models. It should have been pretty evident that regardless of the cost differences there is not much difference between all of these trainers. They’re all made with 11-gauge steel frames and have the same general frame design and total footprint, they all (save for Free Motion) use the same 2:1 pulley configuration, and they’re all within a couple inches of one another in terms of height. Yes, some of them have a water bottle holder, and some have more available carriage positions, but functionally there is little to no difference.

Now if $1899 is still too much for you then you can cut your cost down even more by going with the lighter-duty units that utilize your existing weight plates rather than having a pair of selectorized weight stacks.  A unit like the Powertec Streamline Functional Trainer ($1599) is a great example of such a machine.

To be completely honest, cable machines that require weight plates gets old fast.  Even the plate-loaded lat towers that only have one pair of pins to load gets old; imagine loading and unloading two carriages day-in and day-out. Even worse, you aren’t even saving that much money by getting rid of the weight stacks. Deal with loading plates over a $300 difference? I don’t think so! You’re going to regret it

The fact is that the Rep Fitness FT-5000 is priced about as brilliantly as possible. $1899 is extremely competitive.  You cannot ask for more machine for less money without seriously sacrificing something – stability, quality, versatility, capacity, ease-of-use, something. Don’t take my word for it though, do your research. Be thorough about it too, and you’ll see.


 

Rep FT-5000 versus the FT-3000

The Rep Fitness FT-3000 Functional Trainer is a more compact alternative to the FT-5000. At $1599 versus $1899, the FT-3000 is shorter (78″ tall vs 85″), narrower (53″ wide vs 72″), and has slightly less weight per stack (180-lbs per stack vs 220-lbs.) The FT-3000 is a nice alternative for those with very limited space, but it wasn’t for me. Why not, you wonder?

Rep Fitness FT-3000 versus the FT-5000

All three of the differences that I just mentioned mattered to me. I’m too tall for a functional trainer that’s just 78″ high if I want to make use of the pull-up bar, the columns are simply a little too compact (too close together) for my 75″ wingspan, and truth be told, having access to 40-lbs more per stack was huge. 220-lbs versus 180-lbs matters; at least to me.

Keep in mind that my preference for the FT-5000 is based entirely on my height and weight and ability to utilize all of the available weight. You probably aren’t as tall as me.  You might not care about the available weight at all because of what you intend to use your functional trainer for. In other words, the FT-3000 may be absolutely perfect for you and your space.

The FT-3000 has a more basic pull-up bar than the FT-5000 does

Another difference is that the FT-3000 has a fairly basic pull-up bar when compared to the FT-5000.

If that’s the case, then by all means go with the FT-3000 instead of the FT-5000. In terms of function and design these units are the same. I don’t think the 5000 is inherently better than the 3000, it just has a bigger footprint, has more available weight, and costs a little bit more. The only thing I’d ask you to consider if you’re leaning towards the FT-3000 is this…

Will anyone else besides you be using this functional trainer? Will it be enough machine for them?  If you’re a personal trainer or putting this in a gym with actual members, I say spring for the FT-5000 just to be safe. It’s just not a huge price difference when you think about it.


Rep FT-5000 Functional Trainer – Pros and Cons

Pros

  • Assembly is very straight-forward and relatively simple. Minimal tools are required, and one can technically assemble the entire unit by themselves. I personally assembled my FT-5000 alone, but I’d still recommend calling up a friend for help as there are a couple of challenging steps to do solo.
  • The FT-5000 is a commercial piece of equipment being sold for much less than what all the mainstream commercial dealers ask for their lightcommercial functional trainers (to say nothing of what they charge for their full-commercial machines.)
  • The weight stacks are ample at 220-lbs each with a 2:1 ratio. This about is 20-lbs more per stack than the average functional trainer.  There are bigger stacks out there, but be careful when comparing other units as all the units I found with stacks heavier than 220 operated at a 3:1 ratio, which results in much less effective resistance (Free Motion is a great example of this sort of functional trainer.)
  • The entire cable system is incredibly smooth.  The cables don’t drag or catch, and they travel pretty far from their origin (81″). Considering how competitively this unit is priced, I have to say that I’m really quite impressed. Nothing about the pulleys or cables seems cheap or half-assed.
  • The FT-5000 does not require anchoring, yet even unanchored it feels like it’s one with the Earth. It does not budge! No shaking, shifting, wobbling, and so forth. Pull at all 440 lbs of available weight and you will still not feel the unit shift in the least.  The downside to this is that you better get it where you want it before you finalize assembly,  because good luck moving it later.
  • The FT-5000 has three pairs of pull-up/chin-up handles, with two of those pairs offering two different hand positions. That’s five possible hand positions – much better than what is found on many other functional trainers, including even the FT-3000.
Multiple handles for pull-ups and chin-ups on the FT-5000
  • Aesthetically this machine looks great. The finish is flashy yet incredibly resilient. You’ll have to go out of your way to chip the metallic powder coating. The FT-5000 also ships with a big package of plastic caps that cover up all of the bolt heads – which also helps a lot with the overall look of the machine.
  • There are a number of minor features that add to the overall user experience, such as a magnetic selector pin in each stack, laser etched numbers in the cable columns, decent urethane handles being included rather than those generic metal stirrups, two horizontal crossmembers with storage pins rather than just one, and so forth.
  • The end of each cable has both the little rubber ball that’s typical of cable machines and also a large rubber gripper that is great for movements that require no attachments; like say standing reverse delt flyes or tricep kickbacks.
Rep Fitness FT-5000 - Large rubber grippers for movements where no attachment is needed
  • Did I mention the price? The FT-5000 is not only competitive with the entire commercial industry,  it’s on par with and even less expensive than many inferior functional trainers. But hey, you don’t think I spent my money on the Rep because I thought I was getting a bad deal, do you? I like to think I know what I’m doing here.

Cons

  • The first plate is heavy; weighing in at 11-lbs (and this is with the 2:1 ratio). This can be pretty heavy for beginners when it comes to certain exercises; namely exercises for the shoulders / rotator cuff.  However, depending on when you see this review,  it’s possible that this has already been addressed and is no longer the case.
  • The two large Victory stickers on the outside of the FT-5000 both seem to want to come unstuck in the exact same place. It’s just a little section in the middle of the sticker (so it can be pressed back down easily enough), but it catches my eyes and bothers my OCD a little.
Rep Fitness FT-5000 - Both Victory stickers have a permanent bubble in the exact same spot =/

In the couple of months that I’ve had the FT-5000 I have not run into any issues, and it gets used very regularly; not just here and there. The issue with the heavy first plate is not even an issue for me, I just happen to be aware of the fact that an 11-lb minimum may indeed be too heavy for one new to resistance training. The thing with the sticker is nothing. Honestly I added that con because it felt ridiculous to have so many pros and just one con (and it truly does trigger my OCD a little.)

The FT-5000 is just a solid, well-designed and refined piece of equipment. I have literally no regrets about this purchase, and while it may be priced extremely well in the market, it’s still no small purchase by any means. Still, no regrets.


 

Rep FT-5000 Functional Trainer – Summary

Of all the new equipment that I’ve added to my gym in the past couple years, the FT-5000 has got to be the most interesting, the most versatile, and the most well-received piece by far.  It offers up so many exercises that are either hard to do with a typical power rack set- up, or just plain impossible. Seriously, the possibilities are endless.

I absolutely love having this machine. I completely dig it, and so do all of my friends. I have no doubt that the Rep FT-5000 Functional Trainer is a permanent fixture in my garage gym.

Having said that, would I change anything? Functionally, no. The FT-5000 works beautifully and with no issues. Some functional trainers have more holes in the columns, but we don’t really need such precise vertical settings on a machine like this so it really doesn’t matter if there are 20 total holes rather than 16, or something like that. Honestly I think this machine is about as great as it can be for this kind of money.  Matter of fact, it is better than it should be for this kind of money. I’ve got no real complaints.

I highly recommend the Rep FT-5000 Functional Trainer for any gym. A commercial gym, a garage gym, you name it!. No other single piece of equipment gives you access to so many movements, and no other company gives you so much functional trainer for your money. As I said before, I have no regrets. Neither will you.


 

Garage Gyms Flags now available at the Garage Gyms Store - Be a sport and support future equipment reviews here!
{ 42 comments… add one }
  • Marc September 20, 2019, 11:36 am

    Excellent review. I purchased a used Tuff Stuff PS-245 Functional Trainer (the same model as seen on the Athlean-X YouTube channel) for $1800 and drove 12 hours round trip to get it. It came with two, 200lb stacks, and a 4:1 ratio, essentially putting a max of 50lbs of available resistance at each ‘arm.’ I later ordered two, 2:1 cables from Tuff Stuff (around $200.00 delivered) and now get 100lbs max resistance available per ‘arm.’ If I won the lottery, I’d be looking at the Prime Fitness Functional Trainer.

    • jburgeson September 20, 2019, 11:53 am

      haha yeah that’s a pretty nice piece of equipment that Prime FT… lottery is right.

  • Jennifer October 21, 2019, 11:48 am

    Great review. Thank you! I’ve been researching these and hope to purchase one at some point in the future. I didn’t see any reference to noise and clanging of the plates. This unit will be in our finished lower level and I need to be cognizant of noise. I know some machines (like the FTS Glide) has dampers between the plates to minimize noise. Does this have anything similar? What is your impression of the sounds it makes? I understand this can be subjective but just trying to form an overall impression and expectation. Thanks again – love your site!

    • jburgeson October 21, 2019, 11:57 am

      Thanks Jennifer. I would say it’s not overly loud to let the plates back down, but I don’t think they went out of their way to muffle the sound by using rubber dampers or anything. It’s just a bushing in between each plate.

      Now the bushings that are in each plate do sit above the metal (they’re not flush) and I have to say that helps, but they’re just a composite, not a material that’s doing a whole lot for noise.

      Now having said all that, when I do things like crossover, delt flyes, weight crunches, etc, I’m not actually dropping the plates back down on the stack in-between reps, which is why I don’t think I’ve ever thought of it as being loud. It only makes noise when I set it down after the set, but even then not really cause I always lower it down in a controlled manner.

      I guess the short answer is: I wouldn’t consider this machine loud, but is there something quieter like the FTS? Probably.

  • Brianmllr November 23, 2019, 9:34 am

    How well does this function for lat pull downs and low rows? I’m picking up a Rep v2 5000 powerrack and thinking of cutting out the lat/low row pulley attachment on that and instead investing those saving in this for full on cable machine versatility. With the added width of the FT-5000 I can’t tell if the lack of a center mount point is problematic for those exercises. In your opinion would there be value in having a plate loaded center mount lat/low row on a power rack if you already have this machine?

    Great thorough review! Thank for all the insight.

    • jburgeson November 23, 2019, 11:02 am

      Thanks Brian!

      The major back cable exercises are a no-go on functional trainers unless you’re doing them for rehab purposes (fairly light weight). 200-lbs at a 2:1 ratio is just not enough weight for a pulldown or mid row, and while you might be able to get creative with a double attachment of some sort (connecting to both stacks with a single attachment), it’s far from ideal. It does sucks wanting/needing both – a huge portion of my square footage currently goes to a functional trainer AND a lat tower.

      So, the answer to you question is yes, if you actually require access to a lat/row machine for your training. Not everyone cares about these towers though; maybe they’re fine doing barbell rows and pull/chin-ups. Don’t buy the add-on if it’s not going to be used regularly cause it adds a lot to your total footprint, though it is still way less space than a standalone lat tower.

  • Matt February 6, 2020, 11:10 am

    The BodySolid GDCC250 FT has a version that adds a 310ib weight stack. Their website says the ratio is 1/2:1 and I’m assuming that more or less means 2:1. On Amazon the 310ib version is around $2600 at the moment but I’ve had it on my wish list for a while and I’ve seen it a few hundred dollars cheaper and that’s with free shipping. I’ve been mulling over getting that vs the Rep FT5000. I think the compactness and the overall aesthetics of the Rep are the main deciding factors in making me lean toward the FT5000.

    Now like another user pointed out, if I had money to blow I’d definitely go with the Prime Prodigy Selectorized HLP Rack but no way I’d be able to justify that to my wife lol.

    • jburgeson February 6, 2020, 11:35 am

      That Prodigy is intense. My OCD could never handle that thing.

      Full-sized cable crossovers are probably a tough sell for a home/garage. There’s a few things you can do in a CC that would be tough to do in a functional trainer, but the amount of space required to own one? Also, 300-lbs is a lot for either of these units. Lat tower, sure… but I guess there are those who could benefit from so much weight on a FT.

  • KTD March 15, 2020, 6:26 pm

    How does this compare to Life Fitness Signature Series Dual Adjustable Pulley? I was originally looking at the life fitness one, it is much more expensive, so this review caught my eye. Life fitness says weight stack is 390 but says “1:4 resistance level to provide lower starting resistances for less experienced users.” what exactly does this mean? I am not a less experienced user but I do what a cable machine where I can do lower weight shoulder exercises like Lat raises.

    • jburgeson March 16, 2020, 10:34 am

      You don’t want 4:1 ratio. That means that a 10-lb plate on the stack effectively weighs 2.5-lbs by the time you yank that pulley. Other functional trainers (like the Rep) are 2:1. Simpler cable machines like a lat tower are 1:1, but you don’t need the kind of resistance you can get from a lat tower on a functional trainer.

      Honestly I don’t even know how they get 4:1, but that severely limits your ability to do some exercises (or at least do them with adequate resistance), and I certainly wouldn’t pay MORE money for that kind of drawback. Also the lightest setting on the Rep here is 5 kg, which isn’t super light for shoulders, but it’s still pretty light for someone who isn’t brand new. I wouldn’t buy it to train grandmas because of that 5 kg (11-lb) min, but I also wouldn’t buy that Life Fitness 4:1 thing either.

      I hope that helps.

  • Leonid Nilva March 30, 2020, 12:01 pm

    Are you able to put a more detailed photo of the weight stacks? I have an older V1 version of this and it’s quite different. Mine actually has 21 plates instead of 19 that yours does so I’m trying to verify the weight plate stickers on v1 vs v2.. Thank you, love your content!

    • jburgeson March 30, 2020, 1:30 pm

      Is the email you used to comment real? I can send you a photo later when I go train. I can’t attach photos to comments, unfortunately.

      • LEONID NILVA April 1, 2020, 8:27 am

        Yeah.. but I think I found my answer. From an older Rep Fitness YouTube video, https://m.youtube.com/watch?v=l17CWWvgQkg&t=182s

        They show the V1 version of this not only had an extra 1 or 2 plates like mine but the yellow V1 stickers also state actual weight and not effective. Mine has effective weight but still has 21 plates.

        • jburgeson April 1, 2020, 11:23 am

          They updated stickers on the V2 a short while after it was available. The first plate was incorrect, which made all the others off as well. That’s been fixed (and the first plate on V2 is 5 kg, in case you were wondering.)

  • Justin April 1, 2020, 10:27 am

    Any thoughts on the Xmark functional trainer compared to the Rep?

    • jburgeson April 1, 2020, 11:27 am

      XMark has less weight, a higher price, and less pull-up variability. XMark products are, by-and-large, more economical in their design; which makes it kind of surprising what they want for their FT.

  • Brett LaGrange May 8, 2020, 7:46 am

    Great review on this functional trainer. I currently have this preordered at Rep with a Rep PR 4000. My question would be is this machine worth it. I have one issue the footprint and the cost. My space is about 11×11 and I still have to have the power rack in my space. Would it be overkill to have the Rep power rack and functional trainer too? I like the Rep power rack with the attachments they offer just thinking that if I get the attachments for the Rep rack this might be overkill….thoughts also the footprint concerns me ….thanks in advance

    • jburgeson May 8, 2020, 11:08 am

      I wouldn’t say it is overkill normally, but you need to have the space of course. A functional trainer can do a lot that a power rack cannot. The question is, do you even need to be doing these things as part of your programming, and if so, is it worth the space commitment. You can put the trainer in a corner and it’s not too bad on space, but you do need to leave the space in front of it clear. I don’t know. It does sound tight at 11 x 11…

      I’d take a piece of paper and draw your space out and scale down these pieces to scale and see how you might make it work, then decide if both still sound like a good idea. It seems possible, but it kind of seems tight too.

      • Brett C LaGrange May 8, 2020, 1:06 pm

        Thanks so much I will do that and maybe the FT 3000 could be an option too with limited space

  • Brian Miller May 11, 2020, 11:24 am

    Thanks for this great article and all the other great work on this site. I went with the FT-5000 v2 for my basement gym after reading the comparisons here. My unit arrived in February and I love it! Here are a few additional notes that may help people decided:
    Pros
    – The pull up bar has very nice rubber wrapped grips and a variety of grip options. I prefer it to the one on my PR-5000 v2 rack from REP Fitness.
    – I’m 6 ft 250lbs and the thing is solid as a tank for all exercises and pull ups. It ain’t moving.
    – Decal on the side is now a REP logo rather than Victory. Which I liked since it matches my other REP gear but is different from this article. I’m guessing this is their new standard now that REP Fitness and their brand is making further headway in this market.

    Cons:
    – The plates clank quite loudly even when returned under good control.
    Anyone had any luck adding sound dampening to a weight stack machine like this? I’m thinking some thin rubber stick on strips between plates could go a long way as long as it does’t affect the pin alignment. Other techniques people have tried?
    – Freight delivery company it was shipped through expected me to have equipment to move it off their truck (basically a fork lift/loading dock) even though I selected the home delivery option stating I did not have this and needed that service. So communicate clearly with your shipping company.

    • jburgeson May 12, 2020, 11:30 am

      Thank you, Brian. Does that sticker stay stuck btw?

  • Jason May 22, 2020, 3:01 pm

    Great information on the FT 5000.
    I was looking at the xmark 7626 functional trainer. But it sounds like this is a better deal and I’m lookong to pull the trigger on the FT 5000. Question. Xmark seems to offer additional accessories- straight bar, rope, v-bar and others. And there might be more excercises you can do they state 35 activities.

    Have you found these things to be true?

    Thanks again for the review.

    Jason

    • jburgeson May 24, 2020, 10:48 am

      I wouldn’t base my decision on which accessories it ships with. Included cable accessories are very basic and worth a couple bucks. You can add or replace any accessory you want on your own.

      Any exercise you can do on the X-Mark you can do on the Rep, and vice versa.

      If anything, you should be looking at weight stack limits and price. Which offers more weight and a better price.

  • Steven May 29, 2020, 1:29 pm

    I have a 16′ x 11′ space in my garage and ordered the PR1100 REP rack but want to get the FT3000. This should fit fine, you think? I’m just worried about running into my rack if I do some cable work that requires some extra range with the cable.

    • jburgeson May 30, 2020, 11:55 am

      It sounds like enough space. I basically have rack, lat tower, and FT5000 in one bay of my garage, which is probably pretty damn close to the space you’re working with. I’d probably still want to like sketch out placement on a piece of paper then go outside with a tape measure and just make sure all will be comfortable enough.

      • Joseph August 11, 2020, 12:42 pm

        Can I ask which lat tower you have? I am currently weighing out getting the FT-5000 or the PR-5000v2. I want both but may get the functional trainer first.

        • jburgeson August 11, 2020, 1:07 pm

          Well I’ve got an actual lat tower; the Body Solid Pro Line with 300-lb stack. I also have the attachment on the PR-5000, but that only gets used for belt squats since I have the other “real” tower. The FT-5000 is kind of a different thing entirely since functional trainers do not make good back machines due to their 2:1 weight ratio and lack of knee pads. But then again, functional trainers are good for pretty much anything and everything else. If you’re a big strength athlete and you want the heavy pulldowns and rows, you probably need the real lat tower. If you’re looking for accessory work – delts, rotator, triceps, etc – then a functional trainer will handle all of that.

  • Mark July 1, 2020, 8:09 am

    Excellent review! I purchased the FT5000 a few months ago and am really pleased with this trainer. I use it 4-5 times per week and agree with your assessment. It would be nice to have a lower starting weight to do isolated muscle group workouts such as rotator cuff internal and external but this isn’t a deal breaker. I do wish my cable pulley handles were a little smoother on the rail for up and down movement as well. Also, your question on the new decal on the sides, my decals are not coming off and seem to be adhered really well. I added some attachments from REP and also purchased some from fitness factory (body solid attachments) that are working out well. The aluminum double swivel bar is really a nice add-on from them. For the money and weight, it is the best system you can buy on the market in my opinion.

  • Mike G July 21, 2020, 8:17 pm

    Im looking at the rep ft 500, I was wondering how low the carabiner sits on the highest setting? Ive seen reviews that state it is really low. Im 6 ft tall and im concerned about doing triceps with a rope and having it hang too low. Im looking between the rep ft 5000 and the xmark functional trainer

    • jburgeson July 21, 2020, 10:03 pm

      Oh yeah, it hangs low. I’m over 6′ and I have just resorted to doing overhead tricep extensions most of the time. When I do feel like doing normal tricep pressdowns I literally just get on my knees. Most people aren’t as tall as we are so they never notice, and all other things considered I don’t think this is a deal-breaker, but that’s just my personal opinion of course. The other issue is that most non-literally-full-commercial functional trainers (aka a $4k+ Precor or Life Fitness machine) aren’t much taller. Anyway, I don’t want to sound like I’m defending that drawback because it is a drawback for us taller folk, but I personally just adjusted and never thought about it again. /shrug

  • Steven July 24, 2020, 11:12 pm

    Got my FT3000 this week, but one of the stacks has quite a bit a friction compared to the other, which is silky smooth. I’ve even applied quite a bit of silicon lube to the rails. Any advice or tips?

  • Fredi August 5, 2020, 12:47 pm

    Thank you brotha! I had been looking for a review on this piece of equipment. Great review.

  • Seth August 9, 2020, 11:05 pm

    Really wonderful review! Though everything is out of stock, I’ve been spending hours today finding the best functional trainer in the price range. I had looked at the Xmark and the BodyCraft until I found your review (while looking for Xmark reviews). My biggest concern when looking at these is finding something that the pulleys are easily movable and the movements are as fluid as possible, since those two things are truly what determine your enjoyment. Since I won’t be having any other weight equipment for a while, is there any reason to think there would be any issue connecting a bar to both weight stacks (like is included with the Xmark)? Additionally, why do you think this system isn’t included on all the “best functional trainer” lists online? Is it the size of the company?

    Thanks for putting your thoughts out there and helping your random fellow humans.

    • jburgeson August 10, 2020, 12:38 am

      You could get one of those bars that attach on both ends. I don’t see any reason why not. It’s probably a good thing to do if it’ll be your main piece of equipment for a while.

      So, not to ruin the fun for you, but those top 10 x lists all generally only include items that they can link to on Amazon or some other similar, big-box retailer. I already knew the answer, but to be safe I looked at three of these lists before I responded to this and yup, they are all Amazon partner links. If the FT-5000 was on Amazon, it would have made the list.

  • Clark September 8, 2020, 11:39 am

    I just set mine up today. It’s definitely a beast! My only concern is the head pins weighing 11 lbs. When putting the stickers on the weights, what’s your thoughts on putting the 11 lbs sticker on the head pin instead of starting with the 5.5. I’m thinking the whole stack will be more accurate, right?

    • jburgeson September 8, 2020, 11:49 am

      I believe they changed the sticker set to account for all the weights when doing exactly what you’re saying; starting with the 11 lb / 5 kg sticker.

  • Elan Benoni October 25, 2020, 1:15 pm

    Thank you for the amazing review! I have been looking everywhere to try and figure out the distance between the pulleys. The diagram they list on their website is not accurate as it measures to the end of the metal arm. Is there any way you can measure the distance from pulley to pulley and let me know? Thank you so much!

    • jburgeson October 25, 2020, 10:12 pm

      I recently got rid of this for another piece to review. Most things don’t stay more than a year or so before they get replaced. It’s the nature of the business. I’m sorry =/

  • John Goff December 16, 2020, 1:47 pm

    Do you think it would be possible to link the pulleys in the middle to get a heavier lat pulldown? I’m really wanting a lat pull down too but they seem really pricey for something that essentially does one thing. Thanks for the great review!

    • jburgeson December 17, 2020, 4:22 am

      Well, there are long bar-style attachments that attach to both cables of a functional trainer, but it’s straight like a barbell.

      I don’t see why you couldn’t find a way to utilize both pulleys with a normal attachment, but I question how well it work. That is, how it would feel.

      It almost doesn’t matter because there still isn’t a seat/knee roller situation to hold you to the earth. You’re still sitting on the floor, limited by your body weight (which I guess may not be an issue for everyone if they are significantly heavier than they are attempting to pull).

      It’s rough though. Lat pulldowns are a solid movement that require a very specific piece of equipment. I have a lat/row tower and believe me, it’s a tough piece to justify keeping sometimes because of the space commitment and relatively small assortment of movements that it makes available.

  • Dick Grant July 27, 2021, 12:38 pm

    Would this FT5000 be ok to put in the house on a regular wood floor, would it be too heavy?

    • jburgeson July 30, 2021, 9:05 am

      I wouldn’t think it would be a problem unless it’s an antique floor / old foundation or something. It’s heavy, but so is real furniture. Large bed frames, dining wood tables, etc. All very heavy. The weight of the trainer is distributed among four feet, it’s not going to move, and it’s a no-impact piece of equipment. Just make sure it’s lifted as it’s moved into position. You will definitely scratch wood floors if you slide it around.

Cancel reply

Leave a Comment